MonoWave II, Sounds

V1.19 - Wacky Plastic (532Kb) Another punchy synth bass sound, ideal for an electro track.

V1.19 - Army of DarkRez (501Kb) Dirty and funky synth bass sound, also uses LFO2 on the mod wheel for a pseudo-FM effect.

V1.19 - AntiMatter (1.2Mb) Really spaced out ambient drone, check out what happens when you press the notes harder to get channel aftertouch.

V1.19 - Cheeky Monkey (285Kb) A Cutting sound.

V1.19 - Cluster Bombs (477Kb) excellent use of velocity routing to filter and oscillator waves.

V1.19 - Jungle Massive (378Kb) A great, BIG sound.

V1.19 - Old Skool (402Kb) This'll take you back a few years!

V1.19 - Sequence control (424Kb) Several Parameters under control via MIDI CC

V1.19 - Velocity to wave (1.7Mb) Playing with Polesweep/resonance and a few other parameters, Velocity is routed to waveform of all three oscillators.

V1.19 - Velocity to wave-2 (1.6Mb) velocity routed to two oscillators, just one to start, fade in the second (detuned from the first) and then the third, a sawtooth an octave down.

V1.19 - Velocity to wave-3 (1.8Mb) Velocity controlling waveform of osc 1,2 and 3, 3 is a fifth down (faded in near the end).

V1.19 - Noodling (Td sound alike?) (6.1Mb) big file this one, but worth the download, it needs to be played loud, Im just playing with the filter and some other parameters.

V1.18 - Over the top modulation routing (353Kb) LFO Controlling Osc1, Osc2 pitch and Cutoff, EG3, controlling Pole sweep, LFO rate and Osc3 pitch.

V1.17 - LFO to Filter cut off, demo 1 (570Kb) LFO routing to Filter cut off, changing the LFO waveshape (64 to choose from).

V1.17 - LFO to Filter cut off, demo 2 (609Kb) LFO routing to Filter cut off, More changing of the LFO waveshape.

V1.15 - External Audio processing (932Kb) Monowave (original version) playing a two note arp, fed into Monowave II, changing filter cutoff, pole sweep and resonance.

V1.15 - External Audio processing2 (1Mb) Drum Loop, fed into Monowave II, changing filter cutoff, pole sweep and resonance.

V1.14 - 1 pole sweeps (506Kb) Filter in 1 Pole mode, 4 sweeps, no res, 1/3 Res, 2/3 Res and Max res.

V1.14 - 4 pole sweeps (465Kb) Filter in 4 Pole mode, 4 sweeps, no res, 1/3 Res, 2/3 Res and Max res.

V1.14 - Band Pass sweeps (645Kb) Filter in Band Pass mode, 4 sweeps, no res, 1/3 Res, 2/3 Res and Max res.

V1.14 - Band Pass playing (459Kb) Filter in BP mode, playing with Filter cutoff and Resonance.

V1.14 - Changeing Pole (810Kb) 5 samples with increasing values of cutoff, sweeping the filter poles from 4Pole to 1Pole.

V1.12 - Bigsweep 2 (340Kb) This time with no resonance but using the filter EG to control resonance amount. (Artifacts caused by MP3 compression)

V1.12 - Bigsweep 2 (426Kb) A bit more EG -> Res.

V1.12 - Plucky arp (3.2Mb) Another Arp, this time, I'm not playing with the resonance, I'm playing with Cutoff, Filter EG decay time, EG -> cutoff and EG -> Resonance.

V1.11 - Big Sweep 2 (467Kb) Same parameters as V109 (I've removed the LFO) so you can compare.

V1.11 - Big Sweep 2 (more resonance) (447Kb) as above but resonance turn up a bit.

V1.11 - Big Sweep 2 (even more resonance) (562Kb) as above but resonance turn up a bit more.

V1.11 - Big Sweep 2 (max resonance) (178Kb) as above but with resonance at full.

V1.10 - Plucky Arp (3.4Mb) Different loop, playing with filter EG depth, resoance, and decay time. Along with LFO modulation on one oscillator.

V1.10 - Big Sweep 2 (408Kb) Big sweep 2 as above, but with LFO modulation on two oscillators.

V1.09 - Big Sweep Big slow filter sweep. You can notice the change in the filter with this one.

V1.09 - Big Sweep 2 As above but with a touch of resonance.

V1.09 - Res Sweep as above, but with resonance, you can hear the harmonic distortion in the filter resonance as it sweeps.

V1.09 - PPG Clunk De-res one two of the three oscillators.

V1.09 - Bells II much the same as before.

V1.09 - Plucky Arp 1 (2Mb) 1.5 minuets of an arp, whilst I play with resonance, filter cutoff, env depth and decay time.

V1.09 - Plucky Arp 2 (910Kb) Same as above, but shorter and an octave lower.

V1.09 - Plucky Arp 3 (980Kb) As above, but more severe messing with the filter parameters.

V1.09 - De-res change (980Kb) we start with a single oscillator playing a sine wave, then we slowly chnage the 'de-res' value.

V1.08 - Filter res demo(1.5Mb) After much tweaking of the filter this is the sound I finally arrived at. 10 single shots, first a straight sweep, the different amounts of resoance and filter EG depth.

V1.04 - Bells II This time a little LFO on one oscillator.

V1.04 - Saw Sweep Sawtooth oscillators, OSC1 with a little LFO and little resonance.

V1.04 - Lfo waveforms OSC1 playing a sawtooth. Then I changed the LFO waveform. First we have saw up, Saw down, Sine, square and then I just picked a few waveform numbers at random.

V1.02 - Moogy Bass 3 oscillators, all playing sawtooth, one an octave lower than the other two, with a little delay.

V1.02 - Sweep Bass same thing, but with resonance and a much slower filter decay.

V1.02 - Oppsosites meet a sort of hollow sound, with delay.

V1.02 - The Bells! 3 oscillators all with a bell waveform, all detuned from each other a little.

V1.02 - PPG Clunk one oscillator an octave lower than the two, with a harsh PPG Waveform.

V1.02 - Vocal one of the PPG vocal waveforms. Again, 3 oscs all detuned slightly.