GorF - Downloads
Here you'll find the files you need to build a clone of GorF. There's are offered up here under the GPLv3 license, this means if you release a modified version of these files, you must release the code/revisions to the public as well.
As I finish them, I'll add the files here.
| User Information | |
|---|---|
| Description | Size |
| Quick Start User Guide | 2.5Mb |
| Control Mode Crib Sheet (courtesy of Paul Henninger) | 41Kb |
| Firmware | |
|---|---|
| Description | Size |
| V2.01 Firmware, Sysex File If you use Firmware older than v0.22, you will find your sequences are corrupt, you'll need to recreate them. Please be sure to send the sysex slowly to GorF if you send it too fast some of the code will be corrupted and you could get strange behaviour. After upgrading you will need to go to Control Mode (Mode + Button 7) and disable Ext Clock, Snap Mode and Record Mode. You will also have to change the last step value back to 8. These values are corrupted when you first update to V2 from V1. |
33Kb |
| V1.00 Firmware, Sysex File (check = b128) If you use Firmware older than v0.22, you will find your sequences are corrupt, you'll need to recreate them. Please be sure to send the sysex slowly to GorF if you send it too fast some of the code will be corrupted and you could get strange behaviour. |
16Kb |
| Files for Builders | |
|---|---|
| Description | size |
| V0.05 Bill of Materials for Gorf V2 in XLS format | 24Kb |
| V0.05 Bill of Materials for Gorf V2 in PDF format | 32Kb |
| V0.01 USA Bill of Materials in XLS format c/o Jason Duerr |
352Kb |
| Eagle PCB Files .ZIP file | 768Kb |
| V1.02 Schematics in PDF format | 32Kb |
| V1.00 hex Files The three files used for AVR Studio, the Flash file, EEPROM file and ELF file (fuse settings) | 28Kb |
| Files for Developers | |
|---|---|
| Description | size |
| Firmware Source Code, V1.00 (ZIP) Source code, with GPL v3 license. Compiled with CodeVision AVR. | 448Kb |
| ROM2SYX Converter to convert .ROM files from compiler into .SYX files (OSX, intel) | 32Kb |
| ROM2SYX.EXE Converter to convert .ROM files from compiler into .SYX files (Windows XP, command line) | 64Kb |
